Never, Components available for use in the tb-t system, Actual terminal locations – Aiphone TB-10T User Manual

Page 2: Ic-dc, Ic-fy, Ic-na, 1c-ja, Ic-da-r, I l l ' ■ i, Lliilli

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BEFORE YOU INSTALL AND OPERATE THE EQUIPMENT -

Prohibitions and precautions-

* Operation;

1. DO NOT HOLD HOOK SWITCH DOWN WHILE PICKING UP HANDSET. THE CALL

TONE SOUNDS THRU THE HANDSET RECEIVER ELEMENT AND COULD CAUSE

HEARING DAMAGE.

*

Installation;

1. DO NOT CONNECT ANY TERMINAL ON ANY UNIT TO AC POWER LINES.

2. Be sure to remove plug of power supply from AC outlet before you open the unit or make

wiring connections.

3. Avoid running the connecting wires

thru

doors, windows or between furniture, which may

pinch and disconnected the wires.

4. The intercom equipment must be installed in as dry and dust-free environment as possible.

* Maintenance;

1. Clean your intercom equipment with a soft cloth dampened with neutral household cleanser.

Never use thinner nor benzine, etc.

2. Do not splash water on the door station by hose, etc.

NEVER

NEVER

COMPONENTS AVAILABLE FOR USE IN THE TB-T SYSTEM

j

TB-IOT; 10-call master.

TB-20T:

20-call master.

TB-20AS: ,4dd-on selector for 20

additional sub stations.

¡0^

PA-T:

Paging adaptor.

Connects TB-T master
to a paging system and
background music system.

PG-lOA, PG-30A, PG-60A:

UL «&. CSA LISTED paging amplifier,
low, 30W, 60W (for North America only).

PG-10B,PG-30B, PG-60B:
Standard paging amplifier. lOW, 30W, 60W.

SP-3N.A: Ceiling mount speaker.
Install with or without NBZ-M
square frame.

TB-TO.AS: .Add-on selector for 40

additional sub stations.

TB-RC: Substation.

TB-RC (R): Sub station with

red case.

ICR-1: Call extension.

DB-TS: Door station adaptor

(required for each door station)

■ Door stations;

All weather resistant type. LED mounted on each cover.

ACTUAL TERMINAL LOCATIONS

The master station terminal block is located on back of the cabinet.

Q

IC-DC

lliilli

IC-FY

i l l ' ■ I

IC-NA

IC-RA

IC-KA

1C-JA

IC-DA-R

ID-DA

ID-NC

Ij— (JO)] for connecting

sub station

e

:

CJ

j for connecting

master station

(M' '

.. for connecting call

extension speaker

..

for power supply to

the door station adaptor

NOTE; For connecting master station and additional selector, joint each connector on

back of the cabinet.

-2-

Advertising
This manual is related to the following products: