Boss Audio Systems HP32 - Manual (Page 3)

General precautions
Please read this manual completely
and carefully prior to attempting to
install your new BOSS AUDIO mobile
audlo/video equipment. Installed
correctly, your BOSS AUDIO
equipment will provide you with years
of enjoyable and safe usage.
Installation of this equipment In any
portion of a vehicle which impairs or
distracts the driver Is improper and
dangerous. BOSS AUDIO assumes no
liability whatsoever for failure to follow
the proper installation of this product.
Please keep this manual In a safe place
for future reference.
Safety precautions
• Do not operate this equipment while
driving - safe driving should always
be your highest priority.
• Do not open or attempt to repair this
unit yourself. Refer any repairs to a
qualified service technician.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately send the product to your
local dealer or service center as soon
as possible.
Instaiiation precautions
Do not Install components in areas
which are susceptible to rain, moisture,
direct sunlight, extreme heat or cold,
excessive dust, dirt or humidity.
Use only the Installation parts and
hardware provided with the unit to
ensure proper Installation. Using other
parts can cause malfunction and
possible damage to your BOSS AUDIO
headphone system.
Use only a power source with 12 Volts
DC (negative ground).
Before final Installation, temporarily
connect the wiring according to the
diagram near the end of this manual,
check it to ensure that it has been
connected properly, and test the unit
to make sure it is working correctly.
What is included?
The HP32wireless infrared audio
system Includes:
• wireless headphones
The HP32 Is an additional set of
wireless headphones for use with
the HP32-IR system or BOSS AUDIO
monitors with wireless Infrared audio
transmission capability.
HP32 User’s Manual - page 2
Notes
AUDIO SYSTEMS
HP32 User’s Manual - page 7