Boss Audio Systems HP32 - Manual (Page 4)

Tivubleshooting
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
SYMPTOM CAUSE REMEDY
No audio present
in headphones.
Sound is of poor
quaiity or has
interruptions and
dropouts.
Power cord is not
properly connected.
Audio input cables not
properly connected.
Audio Input source Is not
operating properly.
Batteries are dead.
Headphone Is not being
used in direct line-of-sight
with the player or remote
IR sensor. Transmission
is best within 6 feet/35°
angle of IR sensor on the
monitor.
Check that power connections
are properly made and all fuses
are in functioning condition.
Check all cables.
Replace or repair A/V source
(DVD player, video game, etc.)
Replace headphone batteries.
Move to a better location. If this
is not possible, consider a more
suitable location for the
transmitter.
Specifications
зоьь
AUDIO SYSTEMS
MODEL HP32
Wireless Headphones
HEADPHONES
Ttansmission system
Carrier frequencies
Distortion
S/N ratio
Channei separation
Frequency response
Power source
Current consumption
Infrared light
2.3/3.2MHZ (left channel), 2.8/3.8MHz (right channel)
less than 1 %
greater than 60 dB
greater than 40 dB
30Hz- 20kHz
(2) X AAA batteries
25 mA max (during play) / 15mA (muted)
All specifications subject to change without notice.
HP32 User’s Manual - page 6
HP32 Headphone Controls and Features
iR SENSORS
0 VOLUME CONTROL KNOB
0 POWER B/A/OFF SWiTCH
This button turns the headphone
on and off.
In addition. If headphones do not
receive any Infrared audio signal
after a short period of time, they will
shut off automatically to conserve
battery life.
0 POWER LED
BATTERY COVER
See the section of this manual about
battery replacement for more details.
HP32 User’s Manual - page 3