Buffalo Technology WLA-L11G User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/it t^e
^/'yout
Page 6
4.3) In the box beside "LAN MAC address”, type in the 12-digit ESS-ID of the
other WLA-L11G that this WLA-L11G will be communicating with. Every two
digits must be separated by a colon (:) (Picture 8). The ESS-ID is found on a
label on the back of the other WLA-L11G, beneath "WIRELESS MAC ADDRESS".
Select "Set".
Picture 8
Basic Settings
L
Aii'Station Name L |AP060016
Group Name
L
[GROUP
AF Coimnmucatioii
t
Acceess Point W^ eless LAN MAC addi ess
00:07:40:06:00:17
[set]
This procedure (starting with Step 3.3, Page 4) must be repeated for the second
WLA-L11G with the 12-digit ESS-ID of the first WLA-L11G. When setting
the second WLA-L11G, disconnect the power from the first WLA-L11G
temporarily, as your Internet Browser will try to remain connected to the
first WLA-L11G if it is on.
You will also need to relaunch your Internet Browser to ensure it disconnects
completely from the first WLA-L11G.
4.4) A new screen will appear with the message below (Picture 9). If you
only added the MAC address in Step 8, use your browser return function
twice to return to the WLA-LIIG's start-up screen. If you changed the AirStation
Name or Group Name in the last screen, you will have to relaunch your
" as the URL to continue.
Complete settings.
After restart Aii Station, you can not coniigure the settings from this screen.
If you want to continue conHguration, please finish browser software then execute it again.
Picture 9