Buffalo Technology WLA-L11G - Manual (Page 9)

Page?
5) Setting up Roaming between two WLA-LIIGs.
Note: The Roaming function allows a wireless computer to search for
the best signal from two WLA-LIIGs.
5.1) On the WLA-L11G start-up screen (Picture 6, Page 5), select the "Advanced
Settings" button. Select "Radio Hardware Settings" from the list
Expanding
Routing
on the left side of the screen (Picture 10).
Picture 10
5.2) The "Radio Hardware Settings" screen
will appear. Beside "Roaming", select
"Use" (Picture 11).
Packet rJter
Wireless LAN Restrictiom
AP Communication
Radio Hardware Settings
ESS-m
D$ Channel
Roaming
^ Generate from Group Name, MAC address and
Roaming settings._______________
O Generate:
Picture 11
II channel $
©ITseODon’t Use
Set
Picture 12
5.3) Select "Set"
(Picture 12).
5.4) After setting up Roaming in the WLA-L11G, it will be necessary to
reselect the WLA-L11G in your AirPort Control Panel. Refer to Step 3.3,
Page 4, for reselection. Select ESS-ID "OOOOOOGROUP" for the
new network name.
Close the AirPort Control Panel. Use your browser return function twice
to return to the "Radio Hardware Settings" screen.
Setting up security for the WLA-L11G.
Note: The WLA-L11G comes with several security features: WEP (Wired
Equivalent Privacy), password protection for the administration of the
WLA-L11G, and the ability to restrict the MAC (Machine Address Code)
addresses that are allowed to access the WLA-L11G.