ClearSounds CST25 - Manual (Page 16)

Page 13
10:30am 8/16 # 61WAITING
800.965.9043
ClearSounds
# 61
48
NEW CALLERS
MESSAGES
#00
DEL ALL!
Deleting All Calls from the CALLER ID List
To delete all the calls stored in Call Memory at once,
press and hold the Delete button for 5 seconds. The
entire list of calls will be completely cleared and the
display shows "DEL ALL!”.
.
Using Call Waiting CALLER ID
If another call comes in during a conversation, your phone will display the "WAITING"
message in the upper right hand corner and the incoming caller's information will be
displayed on the screen. To pick up the waiting call:
1. Press and release the Flash button to put the
current call on "hold" and to answer the incoming
call. To switch back and forth between the two calls,
press and release the Flash button.
2. When a Call Waiting call comes in, you may also hang up the current call in order to
pick up the waiting call. The current call will be disconnected and after a temporary
delay, the phone will ring, allowing you to answer the waiting call.
Message Indication
The Message indicator flashes to indicate a message(s) is in your local telephone
company’s voice mailbox, if you subscribe to voice mailbox
services and your local telephone company delivers a
"Visual Voice Message Waiting Indication Signal".
When you have messages waiting in your voice mailbox,
the screen will display “MESSAGES” and “NEW
CALLERS
” alternatively, and an envelope-shaped Voice
Mail Waiting icon "
" will flash.
Accessing Voice Mailbox
Please follow instructions from your voice mail service provider to access your voice
mailbox.
Clearing the Message Waiting Indicator
If you have Voice Messaging service (Voice Mail), whenever you have a new message the
display will show “MESSAGES” and the red light labeled Message will flash. After you