AstroStart MV-801/802 - Manual (Page 6)

mi80)l ^802
C ontinuous M ode
The Continuous mode consist in sending a "start" command while the engine
is already running under key control.
It leaves the engine running after withdrawing the key from the ignition. This
convenient feature allows you to leave the vehicle for short periods of time
while the climate controls and engine remain on.
Press the "A" button once while the engine is running, do not depress the brake
pedal.
Parking lights, engine and preset accessories will remain on for the duration
of the programmed runtime (10 or 20 minutes).
Remove key, exit vehicle and lock doors. Steering column will be locked and
all safety devices will remain active. If you return to your vehicle before
runtime has elapsed, just turn the key to the "ON" position then drive as
usual.
W hat S tops T he E ngine
For your safety, the engine will stop and/or will not start under the following
conditions.
• The transmitter sends the STOP command
• The hood is opened
• The brake pedal is depressed
• The transmission is shifted out of PARK/NEUTRAL
• The engine over-rev's
• The main switch is OFF
• The engine revs too slowly during cranking
MAIN SWITCH
Main switch is usually installed under the
dashboard. It is a toggle ON/OFF switch that is
used to cancel start functions only.
Other commands remain active.