Ajusting controls, C installation examples ), N~| tb-f system – Aiphone PG-3 User Manual

Page 4: C installation examples ) n~| tb-f system, 1) straight paging

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

AJUSTING CONTROLS

[ 1

j

When using PG-3 in conjunction with paging adaptor in systems; TB-F, TB-H, KAH & TS-K;

1. After wiring, set paging adaptor TREBLE, BASS & VOLUME controls (and, of background music source, if in­

stalled) and PG-3 VOLUME control at MIDPOINT.

2. Turn on the power supply and background music source (and power supply for PG-3, if installed separately) and

proceed with adjustments in the following manner;

Test operations for paging and talkback paging, as described in the manual.

During paging, adjust paging adaptor TREBLE, BASS & VOLUME controls to desired level.

In case paging volume level is too low after paging adaptor VOLUME control is set at maximum level, adjust

PG-3 VOLUME control to achieve the most desired level.

If background music is included, adjust paging adaptor MUSIC TREBLE, BASS & VOLUME controls (or in

background music source, if included) while listening to the background music.

(4) Adjust PRE-TONE VOLUME control on paging adaptor (PB-1 only).

(

1

)

(

2

)

(3)

I

2

I

When using PG-3 in system: LAP, HM-7 & LAH;

1. After wiring, turn on the power supply (and power supply for PG-3, if installed). Set PG-3 VOLUME control at

MIDPOINT.

(1) Test operations for calling and communication, as described in the manual.

(2) Adjust master station VOLUME controls for calling and communication (LAW-1 VOLUME controls in LAH-20

system) to desired level.

(3) On master station, select the number button assigned for paging (to which PG-3 terminal is connected) and

page. Adjust PG-3 VOLUME control to desired level, while listening to the announcement from the paging

speaker.

c INSTALLATION EXAMPLES )

n~| TB-F system

(1) Straight paging

STATION I

12

<—

t™

2

^

JW

3

®

5{^

'

b

W

t

W

7^

'aW

8^

~2W

lOld

Ti®

cV

12^4^)

TW

c9

P

^

SP

(8U)

NOTES: (1) One power supply may be used commonly,

but

lines should be run separately

from PG-3, PB-1 & TB-F phones.

(2) Depressing | P | button in handset operates

paging speaker.

(2) Paging with talkback

SP (Sill

NOTES: (1) One power supply may he used commonly,

but [+] , (3 lines should be run separately

from PG-3, PB-l/PB-2 & TB-F phones.

(2) Depressing [T] button in handset operates

paging speaker and releasing for talkback.

Advertising