Using on the rechargeable batteries, Using on ac house current – Aiwa XP-R970 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING ON THE
RECHARGEABLE BATTERIES

English

• Be sure to use size AA Ni-Cd 1.2 V rechargeable

batteries, which are commercially available.

• Be sure to read the instructions of the purchased

rechargeable batteries before use.

• When using on the rechargeable batteries for the first

time, charge them until the battery indicator goes out.

Before charging the batteries, close the disc

compartment. You cannot charge the batteries while it

is opened.

1 Insert the rechargeable batteries with the O and

O

marks correctly aligned.

2 Connect the AC adaptor.

® to DC

6

V jack

(D

to a wail outlet

3 Press BSTOP/OFF/CHARGE to start charging.

C-On is displayed and the battery indicator ® blinks.

Recharge the batteries until the battery indicator goes

out. After charging, disconnect the AC adaptor.

Time to recharge the batteries

Recharge the batteries when the E (red) lights. If the
unit remains in use after E (red) lights, Lo batt is displayed

and the current operation will stop.

To stop charging

Press BSTOP/OFF/CHARGE during Charging.

USING ON AC HOUSE CURRENT

Connect the supplied AC adaptor in the same way as
recharging the batteries.
During operation on AC house current, all of the battery

indicator lights.

8

Advertising