Aiwa CX-NA71 - Manual (Page 4)

I
CONNECTIONS
Check your system and accessories
© CX-NA71 Compact disc stereo cassette reciever
@ SX-NA74 Front speakers (For NSX-A740, NSX-A74)
© SX-R240 Surround speakers (For NSX-A74 only)
© SX-ANA72 Front speakers (For NSX-A72)
® SX-FNA71 Front speakers (For NSX-A71)
Common
Remote control AM antenna FM antenna
Operating Instructions, etc.
Owner’s record
For your convenience, record the model number and serial
number (you will find them on the rear of your set) in the space
provided below. Please refer to them when you contact your Aiwa
dealer in case of difficulty.
,
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage. -
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T-Shape and fix its ends to
the wall, ; ,
AM loop antenna:
Position for the best reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKERS
terminals.
• Do not leave objects generating magnetism near the speakers
as these object may be damaged,
• Do not bring the FM antenna near metal objects or curtain rails.
• Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
• Do not unwind the AM antenna wire.
To connect with NSX-A72 or NSX-À71 -> page 4.
To connect with NSX-A740 or NSX-A74 ^ page 5.
Model No. Serial No. (Lot No.)
CX-NA71
SX-NA74/SX-ANA72/SX-FNA71 • . ,
SX-R240 (NSX-A74 only)
3
ENGLISH