Aiphone MYW-CA - Manual (Page 2)

WIRING DIAGRAM
33V22AWG) 165722AWG)
ROOM STATION
(l) When motion detector and audio door station is not installed, have each BLACK/WHITE and RED/BROWN wires insulated.
(D The locator LED is lit on the lE/IF door station, only when MYW-CA is working. IF-DA
To cut off the I.ED all the time, open the case and remove either lead from the PC board.
In MY-ICD system, use PS-18C/D power supply when DP-600Z is installed.
LED lead
PC BOARDS
SPECIFICATIONS
* Power source: Supplied by main room station.
* Dimensions: H x W x D : 163 X 121 x52 (6-1/2" x 4-3/4" x 2”)
* Weight: ApproK. 850g (1.87 lbs.) including mounting
accessories
* Max. distance to object: It is suggested to locate the MYW-CA at approx.
3m/10’ distance to the viewing area,
providing spotlighting illuminatin for the night.
* Image viewing area: At 3m/10' distance; 4.7m/16' vertically 8.4m/28'
horizontally captured by pan-and-tilting operation.
Image viewing area
* Vertical (tilting)
4.7m/16'
8.4m/28'
3m/10A
The outer angle is obtained when camera is
pan-and-tilted, while the inner angle is for fixed
camera position.
Opeationai notes;
In night time, pan-aiid-tilting operation may cause flickering on the monitor, but this is not a unit disorder.
When the system with DP-600Z motion detector is powered on, it may happen that a call will be initiated by itself.
Wait for approx. 15 seconds after powered on, as the system performance can be unstable.
Aiphone Co., Ltd., Nagoya, Japan
Aiphone Corporation, Bellevue, WA, USA
MYW-CA-I(E) 1092B
COMMUNICATION SYSTEMS
® AIPHONE
HOME BUSINESS INDUSTRY. HOME. BUSINESS. INDUSTRY.
Printed in Japan (E)