Vermont Casting VCS4005 - Manual (Page 8)

FUELS
WARNING: Never use Natural Gas in a Grill that has been configured to burn Propane Gas, and never use
Propane Gas in a Grill that has been configured to use Natural Gas, to avoid possible bodily injury. Always
consult the Rating Label on the back of your Grill to confirm which fuel must be used with the Grill.
WARNING: Use only the pressure regulator and type I propane gas supply coupling and hose that is
originally provided with this appliance or as specified, (see Fig. 2).
ADDITIONAL WARNINGS:
• Always install a 20 lb. propane cylinder that is equipped with
a type I valve outlet (see Fig. 3), and that has a 12” diameter
and an 18” height. Always use a propane cylinder that has
been constructed and marked in conformance with either the
specifications for LP Gas Cylinders of the U.S. Department of
Transportation or the specifications in the National Standard
of Canada, CAN/CSA-B339, Cylinder, Spheres and Tube for
Transportation of Dangerous Goods, as applicable.
• Always confirm that your propane cylinder is equipped with
a shutoff valve terminating in a Type I propane cylinder valve
outlet connection, and that it has been provided with a collar
to protect the cylinder valve.
• Never install a propane cylinder in this Grill unless it is
equipped with a listed Overfill Protection Device (OPD).
• Always have a new propane cylinder properly purged of air
by your certified propane gas dealer. Since a new cylinder is
initially filled with air, the air must first be purged before it is
filled with propane.
• Always visually inspect the gas supply line for fraying,
cracking or rodent damage before each use of this Grill and,
if necessary, install a replacement obtained from your dealer
prior to lighting this Grill.
Safety
Page 2
Fig. 3
Check hose for breaks or wear
before each use.
Type I Con-
nector
Regulator
Shutoff Valve
Collar
Fig. 2