Aiwa CDC-X136 - Manual (Page 14)

MAINTENANCE SPECIFICATIONS
Cleaning the front panel
When the front panel is soiled, wipe the surface
of the panel with a dry and soft cloth.
Cleaning the connector
The connector on the reverse side of the front
panel needs to be cleaned occasionally. Wipe
the surface of the connector with a cotton swab
slightly moistened with alcohol.
RADIO SECTION
(FM)
Frequency Range: 87.5 MHz-108 MHz
(100-kHz steps)
87.5 MHz-108 MHz
(50-kHz steps)
12.7 dBf Usable Sensitivity:
50 dB Quieting Sensitivity:
17.2 dBf
iF Rejection: 80 dB
Frequency Response: 30 Hz-15,000 Hz
S/N Ratio:
63 dB
Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selectivity:
70 dB
Capture Ratio: 3 dB
(AM)
Frequency Range:
Usable Sensitivity:
530 kHz-1,710 kHz
(10-kHz steps)
522 kHz-1,620 kHz
(9-kHz steps)
30 pV (30 dB)
CD SECTION
Frequency Response: 17 Hz-20 kHz +0/-3 dB
Dynamic Range:
More than 80 dB
Channel Separation: More than 65 dB
S/N Ratio: More than 85 dB
Wow/Flutter: Unmeasurable
AUDIO SECTION
Max. Power Output: 40 W X 4 channels
TAPE/MD IN input
Input sensitivity (load impedance)
TAPE/MD IN: 500 mV (10 k£2)
GENERAL
Power-Supply Voltage:
14.4 V (11 to 16 V allowable),
DC, negative ground
4i2
Bass ± 10 dB at 100 Hz
Treble ± 10 dB at 10 kHz
Preamp Output Voltage (load impedance):
2.2V(10k£2)
Installation size: 182 (W) x 53 (H) x 155 (D) mm
(7V4 (W) X 2Vs (H) X
6Vs (D) inches)
Accessory supplied: Carrying case (1)
•Specifications and external appearance are
subject to change without notice due to product
improvement.
Load Impedance:
Tone Control:
13
ENGLISH