Presetting stations, To preset stations automatically (auto memory), 1 press pwr to turn the unit on – Aiwa CDC-X136 User Manual
Page 7: Fm 1 reni m e 1 iuzi. i 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To turn the unit off
Press PWR.
Note
The “ST” indicator iights up when the tuned-in
station is broadcasting in stereo and the reception
is good.
PRESETTING STATIONS
To preset stations automatically
(auto memory)
1
Press PWR to turn the unit on.
2
Press BAND to select a desired band
from among FM1, FM2, FM3, AM1, and
AM2.
FM 1
reni
m e 1
iUZi. i
3
Press and hold A.ME for more than 2
seconds to activate the automatic
presetting function.
This unit can store up to 6 stations in memory
for the preset station buttons 1 to 6 with “LO”
(local) indicator lighting up.
If the unit could not search for all of 6 stations,
“LO” (local) indicator goes off and starts
searching for weaker stations again.
Use this function to automatically preset up to 6
stations each for FM1, FM2, FM3, AMI, and AM2
(up to a total of 30 stations).
•When auto memory is completed, the station
stored in the preset station button 1 is tuned in.
•To stop auto memory, press A.ME again.
To check the preset stations (preset scan)
• If you wish to check the preset stations, press
A.ME for less than 2 seconds. The preset stations
stored in memory will be tuned in for 5 seconds
each in order.
• To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
continued
ENGLISH
6