Canon A20 - Manual (Page 34)

32
Shooting Mode
Shooting information appears on the LCD
monitor for approximately 6 seconds when
you take any of the following actions. With
one exception, this information appears
even if the monitor is turned off.
• The power is turned on.
• The
, , / or / button is
pressed.
• The camera settings are changed.
• The Setup menu is closed.
• The shutter button has been pressed
and a shot has been taken (LCD
monitor must be on).
Information Displayed on the LCD Monitor
Remaining Image
Capacity
The following information appears on the
LCD monitor.
If you wish to select the flash mode, select
macro or infinity mode, select the self-
timer, or select continuous shooting, the
information shown in gray above must be
visible on the monitor. If this information is
Shooting Mode p. 37
Exposure Compensation ... ... p. 46
White Balance p. 47
Compression p. 37
Resolution p. 37
Flash p. 39
Shooting Method p. 45
Macro/Infinity p. 42
A10
Ч
3.8
Ч
4.8
Ч
6.0
p. 36
A20
Ч
3.8
Ч
4.7
Ч
6.0
Ч
7.5
Camera Blur Warning p. 31
Zoom
Settings*