Canon A20 - Manual (Page 50)

48
3
Press or button as
necessary to select the
desired setting.
• If the LCD monitor is on, you can check
the results by viewing the image on the
LCD monitor.
• A shot can be taken immediately after.
The menu will reappear after the shot,
allowing you to adjust the setting.
4
Press the SET button.
5
Take the shot.
2 1
3
4
1
Turn the mode dial to or
.
2
Press the / button as
necessary to display the
[White Balance] menu.
The LCD monitor displays the current
setting, and a menu of all available
settings.