Technical specification – Arcam Alpha 10 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technical specification
Supply voltage:
1 15v or 230v AC
RDI (Radio Data Interference) output
Power consumption:
30W operational
Format:
Optical (TOSLINK)
5W standby
Modulation:
Bi-phase (IEC-958)
Analogue audio output
RF input
Level:
2.4V RMS @ OdB FS
Tuning range:
I74-240MHZ (Band III)
Output impedance:
<100 n
1452-1492MHz (L-band)
Minimum load:
>600 n
Aerial
Bandwidth (+/-0.5dB):
20Hz - 20kHz
Impedance:
50 n nominal in operational
frequency range
Headphone output
Connector:
BNC
Level:
variable up to > 1 OOmW
max into 32
Decoding
Output impedance:
1 10 ii nominal
Maximum audio data rate: 256kbit/s MPEG layer II
Load impedance:
8- 600 n
Maximum number of
Connector:
6.35mm (0.25 inch) stereo jack
stored services:
128
socket
Dimensions W/D/H mm
430x310x100
Weight
5.2 kg nett/ 7,0 kg packed
Digital audio output
Supplied accessories
mains lead
Format:
SPDIF coaxial & optical (TOSLINK)
Remote control inc 2 x AAA
Sample rate:
48kHz
batteries
Output impedance
Simple indoor aerial
(coaxial):
75 fi unbalanced
(Wire Dipole)
E&OE