Aiwa XD-DW7U - Manual (Page 36)

Disc Menu:
1 At the initial setting screen, select “Disc
Languages” by using ▲ or k. Then
press ENTER.
2 Use ▲ or k to move the cursor (the
yellow area) to “Disc Menu”.
Digital Output
Choose the item
1 Audio Language
2 Subtitle Language
3 Disc Menu
Original
Auto
English
ENTER : Choose item RETURN : Previous menu
SETUP : Complete_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Press ENTER.
4 Use ▲ or k to move the cursor (the
yellow area) to the desired language.
And press ENTER.
Choose the item ik
1 Spanish
2 English
3 Other
ENTER : Choose item RETURN : Previous menu
SETUP : Complete
Spanish:
Show the Disc menu in Spanish.
English:
Show the Disc menu in English.
Other:
The language code setting screen appears.
The procedure for setting the language code
is the same as for “Audio Language" setting.
Refer to the steps 5 and 6 of “Audio
Language" setting.
5 Press RETURN to return to the previous
screen or press SET UP to exit the setup
menu.
If the language selected by these settings does
not exist on the disc, then the disc's default
language will be used.
Sets the audio output to be output from AUDIO/
OPT OUT jack of the unit according to the type
of audio equipment connected to the unit.
1 At the initial setting screen, select
“Digital output” by using ▲ or k. Then
press ENTER.
2 Use ▲ or k to move the cursor (the
yellow area) to the suitable setting.
Choice Digital Stream type
Choose the item ik
1 Bit Stream
2 2CH 48kHz 16bit PCM
ENTER : Choose item RETURN : Previous menu
SETUP : Complete
Bit Stream (See page 40.):
Digital output is applied only for DVDs with 48
kHz/16 bit linear PCM audio, and is impossible
for DVDs with 48 kHz/20 bit/24 bit, 96 kHz
linear PCM audio during playback. When they
are played back, signals are converted into 48
kHz/16 bit with digital output. Due to secured
copyrights, DVDs with PCM audio are played
back at 48 kHz/16 bit or below. DVDs recorded
in Dolby Digital (AC-3) format will be played
back with Dolby Digital (AC-3) Bitstream (2ch-
5.1ch) audio output. Select this option if your
DVD player is connected to a Dolby Digital
(AC-3) decoder.
When the DTS audio is selected and played,
DTS bitstream is output to Bit-stream.
2CH 48KHz 16bit PCM:
Converts output into 48 kHz/16 bit PCM (2ch)
when a DVD recorded in Dolby Digital (AC-3)
format is played back.
3 Press ENTER.
Your entry is saved.
4 Press SET UP to exit the setup menu.
CONTINUE
ENGLISH 34
Disc Languages
Disc Menu