Aiwa XD-DW7U - Manual (Page 8)

Remote control Using the AC adaptor
Installing batteries
Detach the battery cover on the rear of the
remote control, and insert two R6 (size AA)
batteries with 0 and 9 aligned correctly.
When to replace the batteries
The maximum operational distance between the
remote control and the sensor of the units
should be approximately 5 meters (16 feet). If
this operational distance decreases, replace the
batteries with new ones.
NOTES
When operating with the remote control, point
the top of the remote control toward the
player.
■ If the unit is not going to be used for an
extended period of time, remove the batteries
to prevent possible electrolyte leakage.
■ The remote control may not operate correctly
when:
- The line of sight between the remote control
and the unit is exposed to intense light, such
as direct sunlight
- There is fluorescent lighting near the remote
sensor.
- Other remote controls are used nearby
(those of a TV set, etc.).
Two adaptors are supplied with this unit. To
make this unit work, use the smaller one (AC-
D918U).
To 120V AC outlet
1
Connect the AC adaptor to the main
unit.
Insert the AC adaptor plug to the DC IN 9V
jack of the main unit.
2
Insert one end of the supplied AC
power cord to the AC adaptor
socket.
Use only the supplied AC power cord.
3
Insert the AC plug to the AC outlet
(120V, 60Hz).
CONTINUE
ENGLISH 6