Connect Tech JB2 - Manual (Page 19)

Chapter 3: Software Installation 3-1
Titan/cPCI User’s Manual, ver. 0.00
Software Installation
Introduction
Your Titan/CPCI adapter may ship with diskettes that include
README files. Please examine these files for technical tips or
release notes concerning installation and configuration of various
device drivers and software utilities. If you require further
information please contact Connect Tech Customer Support.
Before installing the Titan/cPCI software device driver, verify and
note jumper settings described in Appendix D: RS-485/422 Line
Interface for:
„ Jumper block JA – Full duplex, half duplex and multi-drop
slave control
„ Jumper block JB – RS-232, RS-485/422 select
„ Jumper blocks JC, JD, JE and JF – line bias/termination.