Using the electric timer, Hints and tips – Deni Compressor Ice Cream Maker 5300 User Manual

Page 6

Advertising
background image

5

®

5.

After the chilling system has run for the required 5 minutes,
set the timer to the desired setting and press start. (There are
three different options, 10, 30, and 50 minutes.) Note: We
recommend setting the timer to 50 minutes when first making
ice cream. After 30 minutes, check the consistency.

6.

Turn on the motor top by pressing the On/Off button on the
top of the motor.

7.

Pour ingredients in through opening in lid. NEVER fill the
bowl more than half full. During the last minutes of the
freezing process, the ice cream expands in volume until it
fills the bowl.

IMPORTANT

: Avoid turning off the compressor button before the

ice cream is ready. If the button is turned off or in the event of a
power failure, the chilling process automatically stops for about 5
minutes, jeopardizing the success of the ice cream.
8.

When the ice cream has reached a good consistency,
(after about 30-50 minutes) the stir paddle rotation reverses
direction, indicating that the ice cream is ready. If you require
slightly denser ice cream, leave the compressor button on for
an extra 5 to 10 minutes.

9.

Turn off the On/Off button on top of the motor and unplug
the unit.

10. Press the motor top release button and remove the motor

(including the clear-vue lid and stir paddle) by rotating
counter clockwise.

11. Remove the ice cream from the removable bowl using a

plastic scoop or wooden spoon to avoid damaging the walls
and bottom of the container.

12. After the removable bowl reaches room temperature,

wipe away ice cream residue with a damp cloth and dry
thoroughly.

IMPORTANT: Remember to turn the chilling switch off, otherwise
the ice cream will freeze into a block of ice.

Using The Electric Timer

The timer allows you to set a desired period of time to make
your ice cream. If the hardness of the ice cream is not the
desired consistency, reset the timer and the buzzer will sound
when the time is up.

There are three time settings (10 min, 30 min, 50 min).
The LED on the top of the unit will flash indicating the time
selected.

Press the start button on the control panel to start the timer.
Press the button on the paddle motor to begin rotation of stir
paddle.

The buzzer will sound during the last 10-30 seconds of the set
time to warn you that the time is almost up and that the
paddle motor will shut off.

Hints and Tips

Read all the instructions and save for future reference.

Cool all cooked recipes in the refrigerator before using.

Flavors will be stronger before freezing.

For better results, drain your yogurt.

5

Advertising