Vom-78t operations manual – ASA Electronics Voyager VOM78T User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VOM-78T OPERATIONS MANUAL
FUNCTIONS AND OPERATION
Front of Monitor : See FIGURE 4
1. Power switch : STD. BY- Monitor operates when vehicle transmission is switched into
"REVERSE" ON - monitor and system operate when ignition switch is "ON"
2. CA1/CA2 switch : "САГ used mainly for rear mounted camera or as specified by the installer.
"CA2" used mainly for side or mirror mounted camera or as specified by the installer.
3. Tilt up/ down switch : Vertical angle or view adjusted into Up and Down positions.
4. Day/ Night switch : Pre-set brightness and contrast levels optimized for day or night operation.
5. Contrast
: Variable control of contrast. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
6. Brightness : Variable control of brightness. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
7. Volume
: Variable control of internal speaker volume.
FUNCTIONS AND OPERATION CONTINUED
Rear of monitor : See FIGURE 4
8. POWER CONNECTION :
(4) (5) (T)
(3) (6) (2)
Pin No.
Description
I
N/C
2
Power ( DC lOV or 32V)
3
Ground
4
N/C
5
Trigger In (DC 12V or 24V)
6
N/C
VOM-78T
5