Setting the operating temperature, Indicator lights, Setting the operating temperature......../4 – Beko FSE 1073 User Manual

Page 11: En setting the operating temperature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

en

en

Setting the operating

temperature

(Fig. 2)

The operating temperature is regulate(d by the
temperature control.

Indicator lights

Warm

Cold

1

(Or) Min.

4

Max.

1 = Lowest cooling setting

(Warmest setting)

4 = Highest cooling setting

(Coldest setting)

(Or)

Min. = Lowest cooling setting

(Warmest setting)

Max. = Highest cooling setting

(Coldest setting)

Please choose the setting according to the

desired temperature.

The interior temperature also depends on

ambient temperature, the frequency with which

the door is opened and the amount of food

kept inside.
Frequently opening the door causes the interior

temperature to rise.

For this reason, it is recommended to close

the door again as soon as possible after use.

The normal storage temperature of your

appliance should be -18 °C (0 °F). If the

thermostat knob is turned counter clockwise
from position 1, the appliance will be switched

off and “click” sound will be heard. Lower

temperatures can be obtained by adjusting
the thermostat knob towards Position 4.
We recommend checking the temperature
with a thermometer to ensure that the storage

compartments are kept to the desired

temperature. Remember at take the reading

immediately since the thermometer

temperature will rise very rapidly after you

remove it from the freezer.

There are three coloured indicator lights located

on the front of the appliance which shows the
operating mode of the freezer.

(Fig. 2)

Green Indicator (1)

Illuminates when the

appliance is connected to the mains and will
glow as long as electricity is available. The
green light will not glow if the thermostat is
set to 'O' position. The green indicator does

not give any indication of the temperature
inside the freezer.

Amber Indicator

(2) This indicator will glow

when the fast freeze switch (4) is on and will

continue to glow until the fast freeze switch is

turned off. The compressor will run

continuously while fast freeze switch is on.

Fast freeze operation is for freezing fresh food.

Red Indicator (3) Illuminates:

a)

If the pre-set temperature can not be

maintained.

b)

If excessive amounts of fresh food are

placed inside.

c)

If the appliance door is left open accidentally.

Thermostat knob (5)

Thermostat knob is

located on the indicator light set.

IMPORTANT:

When you press the fast freeze switch, there

may be a short delay before the compressor

starts to operate. This is normal and does not

indicate a compressor fault.

Advertising