Sening the sleep timer, Care and maintenance, To clean the cabinet – Aiwa AV-X120 User Manual

Page 15: 1 press the sleep button, To cancel the sleep timer, Sening the sleep timer care and maintenance

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SEniNG THE SLEEP TIMER

CARE AND MAINTENANCE

Occasional care and maintenance of the unit is needed to
optimize the performance of your unit.

To clean the cabinet

Use a soft dry cioth.

If the surfaces are extremely dirty, use a soft cloth lightly

moistened with mild detergent solution. Do not use strong

solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.

O

o

2

^

iiS

m o

g

The unit can be automatically turned off at a specified time.

Use the remote control.

1 Press the SLEEP button.

2 Press the UP^ or DOWN-^ button within four

seconds to specify the time untii the power is
turned off.

Each time the button is pressed, the time changes between 5

and 240 minutes in 5-minute steps.

Specified time

; ; ; / ; ;

To check the time remaining untii the power is turned off

Press the SLEEP button once. The remaining time is displayed

for four seconds.

To cancel the sleep timer

Press the SLEEP button twice so that “SLEEP” on the display

disappears.

ENGLISH

14

Advertising