Remove oven accessories, Cleaning and maintenance – AEG B 60 D User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning and maintenance
Removing the shelf supports
Remove oven accessories
1 Loosen both nuts at the rear on the left and
right of the oven.
2 Unscrew both nuts at the front on the left
and right of the oven.
3 Remove the shelf supports.
Re-assemble in reverse order.
To remove the rear panel
The rear panel
(fig. 10)
of the oven can be
removed for cleaning. Proceed as follows:
1. Unscrew the four nuts.
2. Clean the panel as in the case of all
enamelled surfaces.
3. Re-assemble in reverse order.
When replacing the rear panel, make sure that
it is correctly placed.
To remove the fan
Having removed the rear panel you will gain
access to the fan
(fig. 11)
which Is held on the
motor shaft by a nut (left-hand thread). Loosen
this nut by turning it clockwise and remove the
fan. Clean the fan with hot soapy water.
Replace the fan and remember to fasten the
nut by turning it anti-clockwise.