Adcom GCD-200 - Manual (Page 4)

0 Track/Time button
Press to change the Digital display d> from track (/index)
display to time display, and vice versa.
O Drawer Open/Close button
Press this when loading or unloading a disc.
0 Play/Pause button (►/■■)
Press to begin play; the play indicator ©will light. Press
during play to temporarily stop play; the Pause indicator ©
will light. Press this button to resume play at the point
where it was ptaused.
0 Stop/Clear button ( ■ )
Press this button to stop play or to clear the program.
0 Repeat button
This button is pressed when performing repeat play.
0 Memory button
This button is pressed when memorizing programs for ran­
dom memory search system.
0 Fast forward/Index button ( ►»-)
Press to advance the track number forward at high speed.
Also press to designate index numbers.
© Fast reverse/Index button ()
Press to move the track number in reverse at high
speed. Also press to designate index numbers.
0 Forward skip/Track number button ( )
Press to select a desired track number on the disc. Each
time the button is pressed, the track number moves for­
ward.
0 Reverse skip/Track number button ( )
Press to select a desired track number on the disc. Each
time the button is pressed, the track number moves back
one track number.
0 Remote sensor window | Model gcd-SOO only|
Signals from the wireless remote control are received here.
I гаек/ I ime ounon
TRACK — with a disc loaded and in the stop mode, shows
the total number of tracks on the disc. During play, shows
the number of the track being played.
INDEX — during play, shows the index number of the por­
tion of the track being played. If the disc does not have
index information, “01" will remain on the display.
M/S — with a disc loaded and in the stop mode, shows
the total playing time of the disc. During play, shows the
elapsed time from the beginning of the track, even if you
began in the middle of the track or used or ►► dur­
ing play.
I Pause indicator
Lights during a pause.
I Repeat indicator
This indicator lights during normal repeat play, and
"A—B" lights during repeat play between two designated
points.
I Program indicator
Lights during program play when using the random
memory function.
I Play indicator
Flashes during access (high-speed movement) and lights
during play.
I Open/Close indicator
This indicator flashes when the drawer is opening and
closing. When the drawer is fully open or closed, the in­
dicator goes out.
Model gcd-300 only
0 Program number buttons (0 — 9)
Used for program play with random memory search
system, or for track number selection by finding beginning
of selection with Direct Search System.
0 Remote control signal transmitter section
To use, point the transmitter section at the Remote sensor
window © and press the operating buttons.