AEG VITRAMIC 725K - Manual (Page 6)

Equipment and description
Figure 1
A Dual circuit hotplate 12 cm and 21 cm 0
with corresponding switch
B Roaster piate 14.5 cm x 25 cm with
corresponding switch
C Hotplate 18 cm 0 with corresponding switch
D Hotpiate 14.5 cm 0 with corresponding
switch
E Touch control for dual zone
F Touch control for roaster plate
G Residual heat indicator
For the user
Safety instructions
To comply with safety regulations we must draw your attention
to the following instructions:
■ Oniy an approved eiectrical instaiier shouid
connect your appiiance. This ensures that
the iegai requirements and the connection
reguiations of your electricity supply author­
ity applicabie in your iocaiity are compiied
with.
■ To maintain the safety of your appliance
you should only have repairs, especially on
live parts, carried out by a trained electri­
cian. In the event of a fault, you should
therefore approach your retailer or our
AEG Service Department direct.
■ During cooking, the hotplates become hot.
You should therefore keep small children
well away.
■ Overheated fats and oils rapidly ignite on
hot hobs! Preparation of dishes with fats
and oils (eg chipped potatoes) must always
be supervised.
■ Please make sure that the connection leads
of other appliances (eg small appliances)
do not come into contact with the hot
hotplates.
important
Never use this appliance for heating purposes!
This appliance must never be operated
without supervision!