Of output, Fig. 6 – Adcom 2-CHANNEL GFA-5275 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UNBALANCED OPERATION!
DO NOT RUN THESE AMPS UNBALANCED UNLESS THERE IS NO
ALTERNATIVE. The only tíme that this situatíon would come Into play is if you
were utilizing an equallzeror other signal-processor and could not mount it in the
front
of the vehicle, if the amplifier is used without the GPt-5200 you will need to
use the supplied RCA Shorting Plugs (see Rg. 6). Since the GFI-5200 can
provide a balanced signal with up to 18 voits of output, please be sure that if you
omit the GFI-5200, that the EQ or signal processor is capable of delivering at
lea8t2wolts
of output
If the -signal processor is mounted in the front of the vehicle, then you cdn
run the GFA-5000 amplifier in a balanced mode with the included GFI-5200. This
is the prefered way to install a signal processor with the Adcom Balanced
^ molifiers. Refer fOr Rg. 8 for a basic wiring diagram.
UNBALANCED; with Rear-Mounted Signal Processor
O O G O O O
o o o o o o
o
Input Equ#"«'-
This could represent any
rear-mounted signal
processor.
Fig. 6
RearVIew/Male
B-orD-
B or D +
Fig. 7
GROUND
A > o r C +
A • O f C -