Operating instructions – Audiovox AV-970 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING INSTRUCTIONS

13

0 ON-OFF SWITCH/VOLUME CONTROL

Turn this knob to the right to turn the unit on.
Continue rotation untii the desired volume
ievef is obtained.

0 LEFT/RIGHT BALANCE CONTROL

Turn this knob to the left or right to obtain the
desired balance between ieft and right speak­

ers,

0 TONE CONTROL

Turn this knob either to the left or right to

obtain the desired tone response. Turn it to

the right to increase the treble or to the left to

increase the bass.

0 AM/FM BAND SELECTOR

Each time this button is pressed, the radio
band changes. According to your selection,

the selected radio band indicator appears on
the display panel,

0 LOCAL-DISTANT SWITCH

This two position switch is incorporated to allow

maximum reception in both weak and strong
FM signal areas. When tuned to a weak
(distant) station, push the switch in. This will

allow maximum signal to the receiver. When In
an extremely strong signal area (local), release
the switch. This will eiiminate all weak signals

and suppress overly strong signals so as to

avoid overloading the receiver input. When
moving out of a strong signal area, return the
switch to the “distant" position.

Note: The Locaf-Distant switch only affects FM
signals.

Advertising