AEG 860 D User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the
To remove and then clean my metal fat filter grille, proceed as
metal fat filter
follows:
For reasons of safety against any unintentional switching on,
remove my screw-in fuse from the holder or switch off my
automatic fusing system in the fusebox.
1. Press the lock on the fat filter grille inwards and detach the fat
filter at the front and rear.
/
---------------------------------------.
Hr
I
ew
I
X/
2.
Clean my internal housing only with warm washing-up liquid
suds
(never use any abrasive cleaners, brushes, or scouring
agents).
3. After cleaning, re-insert both dry metal fat filters.
4. Re-insert the fuses and reconnect the appliance.
Active carbon
To remove and then replace
2 KL 600 carbon filters (E-No.
filter
610 899 470) (for your own account from our range of special
accessories),
proceed as follows:
For reasons of safety against any unintentional switching on,
remove my screw-in fuse from the holder or switch off my
automatic fusing system in the fusebox.
1. Press the lock on the fat filter grille inwards and detach the fat
filter at the front and rear.
44