Accessories/installation materials, Fume – AEG 860 D User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Accessories/installation materials
1 wall rail (for mounting of
fume
extractor hood)
4 wall plugs for 8 mm, 40 mm long wood screws (for mounting
of chimney retaining plate on wall and wall rail)
4 button-head wood screws, 5 x 40 to DIN 7996
2 wall plugs for 5 mm, 30 mm long wood screws (for mounting
of clamping piece)
2 button-head wood screws, 6 x 30 to DIN 85
1 drilling template for appliance mounting
1 125 mm dia., 800 mm long hose
2 125 mm dia. hose clips for above
1 chimney equalizer (230 mm high)
1 chimney cover plate with air outlet grille for return air
1 chimney retaining plate
1 guide piece (T-piece) for return air operation
4 button-head 2.9 mm x 6.5 mm long sheet metal screws (for
mounting of chimney retaining plate with chimney cover
plate)
3 5x 60 mm screws to DIN 7996 for mounting of wall rail
3 8 x 60 mm wall plugs for wall rail
Preparing for
The fume extractor hood is factory-supplied for commissioning
exhaust air
in
upward exhaust air mode,
operation
Prior to installation of the fume extractor hood, a hole should
be arranged in the outer wall for the wall box (return/supply
air) apart from mounting drillholes.
32