Maintenance and cleaning, Drawer recess, Installation instructions – AEG 1263 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Maintenance and cleaning

Detergent

dispenser

drawer

From time to time, clean off any detergent residue remaining in

the bottom of the drawer compartments.
- To do this, pull out and remove the drawer by pressing down

the catch.

The upper part of fhe liquid additive compartment can also be

removed for easy cleaning.

Drawer recess

Detergent residue can also accumulate inside the drawer recess,

which should be cleaned occasionally with an old toothbrush.
After cleaning, refit the drawer and push it fully in.

After each wash programme, partially pull out the detergent

drawer to let it dry.

36

Installation instructions

All transit devices must be removed before installing and

connecting the appliance.

Proceed as follows:

Using a spanner, remove the bolt on the right at the back of the
machine.

Gently lay the machine on its back, taking care not to squash the
hoses.

This can be done more easily by placing one of the corner pack­

ing pieces between the machine and the floor.

Remove the polystyrene packing piece.

Peel off the adhesive strip and carefully remove the right-hand
polythene bag (1), then the left-hand bag (2) by pulling both

towards the centre of the machine.

Removing the

transit devices

Advertising