American Standard Moments Bath / Shower Trim Kits T50.50X - Manual

AMficMi ShmiMd
Installation
Instructions
T506.50X MOMENTS
BATH/SHOWER TRIM KIT
Congratulations on purchasing your American Standard faucet with
EverClean™ finish a features found only on American Standard faucets.
EverClean™ Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these
instructions carefully before you begin. Certified to comply with ANSI A112.18.1
M968951
Recommended Tools
Flat Blade Screwdriver
Pipe Wrench
Phillips Screwdriver
Plumbers' Putty or Caulking
Adjustable Wrench
Channel Locks
ROUGHING-IN DIMENSIONS
■ To assure proper positioning in relation to wall, note
roughing-in dimensions.
3/4"” TO 2-3/8"
FINISHED WALL
8-1/8" REF.
"SEE ILLUSTRATION
74" FOR
HEAD CLEARANOE
r
18"
OPTIONAL
TOP OF-
TUB RIM
6-1/2"-►
E___
r
T
_
►
- 4"
'
f BOTTOM OF
TUB
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 85" AND 80"
SHR. 1/2" NOM.
COPPER SWEAT
SWEAT
INLETS
TUB 1/2" NOM.
COPPER SWEAT
SWEAT
INLETS (STOPS)
SHR. 1/2" NOM.
COPPER SWEAT
INLETS
4-1/16"
INLETS
1/2" NOM.
COPPER
SWEAT
-5-7/8"-
TUB 1/2" NOM.
COPPER SWEAT
4-1/16"
INLETS
1/2" NOM.
COPPER
SWEAT
INLETS 1/2" NPT
|- OUTLETS
1/2" NPT
-1/2" NPT
-4-1/2" REF.
3-3/8"-
3-3/8"-------
OUTLETS-
1/2" NPT
3-3/8"—
5-7/8" -
INLETS
1/2" NPT
THREADED INLETS THREADED INLETS (STOPS)
EverClean™ Finish Care Instructions
American Standard’s EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with
clean water may also be used, if desired. IMo additional cleaning products are required.
DO IMOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.