Altec Lansing 9845A User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SPECIFICATIONS

Speaker
Components:

Distribution Pattern:

Power Capacity:

Frequency Response:

Impedance:

Pressure Sensitivity:

Equivalent EIA
Rating:

416A 15" Bass Driver
51 IB Sectoral Horn
806A HF Compression

Driver
N500G Dividing Network

Up to 50 watts pink noise,
band-limited from 35 Hz
to 20,000 Hz

35 Hz to 20,000 Hz

16 ohms

97 dB SPL measured at 4'
on axis with 1 watt input
of pink noise band-limited
from 500 Hz to 3000 Hz

114 dB SPL measured at 4'
on axis with 50 watts input

of pink noise band-limited

from 500 Hz to 3000 Hz

50 dB SPL measured at 30'
with 1 mW input

90° horizontal by 60°
vertical (—6 dB included
angles)

Crossover Network:

500 Hz with 12 dB/octave

crossover slope with
switchable shelving
control 0 dB to —6 dB in
1.5 dB steps, located on
front panel

Input Connections:

Thumb-screw type,
located on rear panel

Enclosure Type:

Vented

Finish:

Studio gray lacquer

Dimensions:

28" (71.1 cm) H x40"

(101.6 cm)

W

x

24'/2"

(62.2 cm) D

Shipping Weight:

170 pounds (77.1 kg)

Actual Weight:

130 pounds (59.1 kg)

ARCHITECT'S AND ENGINEER'S SPECIFICATIONS

The monitor/playback speaker system shall be of the two-way type and shall consist of a 15" low-
frequency loudspeaker, a compression driver mounted to a high-frequency sectoral horn, and a 500

Hz, 16-ohm dividing network. The system shall meet the following criteria. Power rating, 50 watts
pink noise. Frequency response, from 35 Hz to 20,000 Hz. Impedance, 16 ohms. Pressure sensitiv­
ity, 97 dB SPL when measured at 4' on axis with 1 watt input of pink noise from 500 Hz to 3000 Hz.

Distribution pattern, 90° horizontal by 60° vertical. Crossover network, 500 Hz with 12 dB/octave
slope with shelving control variable from 0 dB to —6 dB in 1.5 dB steps. The enclosure shall be con­

structed of ^4" material, heavily braced internally and lined with acoustic damping material. Finish

shall be gray lacquer. Dimensions, 28" H x 40" W x 24V2" D. Weight, 130 pounds.

The monitor/playback speaker system shall be the ALTEC Model 9845A.

1515 SOUTH MANCHESTER AVENUE, ANAHEIM, CALIFORNIA 92803

»

LITHO IN U.S.A. CP-775-5K

AL-1756-2

Advertising