Audiovox TDM-2500 - Manual (Page 20)

• Since the display can only show 4 menu items
at a time, you will see an arrow pointing down
under the last menu option if there are more
than 4 menu options in the menu. Press
DOWN at the fourth menu option to see the
additional menu options.
• Press UP at the fifth menu option to go back to
the first 4 menu options.
• You can always enter a menu option directly
by pressing the number that appears to the left
of the menu option.
The following list of menu options describes each
feature’s function and possible settings.
Refer to
Changing Settings on page 35 for more
instructions about changing the settings on your
phone.
RINGER SETTINGS MENU 1
The following menu options allow you to adjust the
tone and volume for incoming calls and
messages.
• Tones sound while adjusting volume and tone
levels.
• To mute the Ringer or Message tones, select
volume level 0.
• The Vibrator option only displays when the
vibrating battery is installed.
1 RIngVol.
Selects the ringing volume for incoming calls.
There are 7 possible settings.
36
1) Press MENU <3D GD (Ringer Set - Ring
Vol.).
2) Press UP or DOWN to change the setting.
3) Press to select the setting.
2 Ring Tone
Selects type of ringing tone for incoming calls.
There are 8 possible settings.
1) Press MENU CED (S) (Ringer Set - Ring
Tone).
2) Press UP or DOWN to change the setting.
3) Press to select the setting.
3 Msg Vol.
Selects the message tone volume for incoming
messages. There are 7 possible settings.
1) Press MENU CD (E) (Ringer Set - Msg
Vol.).
2) Press UP or DOWN to change the setting.
3) Press to select the setting.
4 Msg Tone
Selects the type of ringing tone for incoming
messages. There are 4 possible settings.
1) Press MENU CD & (Ringer Set - Msg
Tone).
37