Attaching the battery, Connecting the charger to the phone, M m m – Audiovox TDM-2500 User Manual
Page 9: Turning the phone on
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the Battery
1) Insert the bottom of the battery into the recess
on the back of the phone.
2) Push inward until the locking catch snaps
securely into place.
• To remove the battery, turn your phone off. Pull
up the locking catch and remove the battery.
Connecting the Charger to the
Phone
When the battery needs to be recharged, 3 short
tones sound. The
Low Battery
icon ZT and
message flash on the display.
1) Connect the charger to the socket at the base
of the phone.
2) Connect the charger to a standard 120 volt
outlet. The battery begins charging when the
charger is connected to the phone.
14
m m m -
® ®
m m m
m m m
* If the phone is left on despite a low battery
alarm, the phone automatically shuts itself off
to protect the battery from over-discharging.
Turning the Phone ON
Press for 1 second to turn your phone on.
When you turn the phone on, a tone sounds and
the display backlighting comes on.
To turn your phone off, press and hold
second.
for 1
If a
Locked
message appears when you turn
your phone on, enter your preset 3-digit unlock
code.
15