Aiwa CDC-X145 - Manual (Page 10)

CD PLAY
SOUND ADJUSTMENTS
Repeat Play
Press REPEAT during CD play.
The “REPEAT’ indicator lights up and the currently
selected track is played repeatedly.
Press REPEAT again to deactivate Repeat play.
Note
If Repeat play is not activated, all the tracks on
the disc are played repeatedly.
12 3
MUTE
1 Press PWR to turn the unit on.
2 Press SEL to select the mode that you
wishtoadjustfrom: VOL(volume), BAS
(bass), TRE (treble), BAL (balance), FAD
(fader).
The following indications appear in cyclic
order.
The selected mode switches to Volume mode
if you do not proceed with step 2 within 9
seconds.
3 Press VOL to project out the control
and turn it to + or — to adjust the level.
Turn and hold the control to change the level
rapidly.
Adjust each mode referring to the audio
control indications in the display window.
—
+
CSB
Decreases the
volume level
Increases the
volume level
Decreases the
bass level Increases the
bass level
li?T3
Decreases the
treble level
Increases the
treble level
ans
Decreases the
level of the right
speaker(s)
Decreases the
level of the left
speaker(s)
Ì33D
Decreases the
level of the front
speakers
Decreases the
level of the rear
speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by turning
VOL.
9
ENGLISH