Aiwa CDC-X145 - Manual (Page 6)

SETTING THE CLOCK
1 Press PWR to turn the unit on.
2 Press and hold DISP for more than 2
seconds.
ms \ 1 1 1 1 1 /
‘"'.tPOO'-
/ I I I iTl
3 Press /'v to set the hour.
Press \/ to set the minutes.
4 Press DISP.
The clock starts working from 0 second.
Having the clock displayed while the unit is
turned on
Press DISP. The clock display appears for a few
minutes, then the unit returns to its former display.
RADIO OPERATION
1
2
Press PWR to turn the unit on.
Press BAND to select the band from
among FM1, FM2, FM3, AMI, and AM2.
The band indication appears cyclicaiiy in
order.
FM1. FM2 and FM3 share the same frequency
range.
AMI and AM2 share the same frequency
range. .
.‘05. i
4
Band indication Frequency indication
Press (more than 0.5 second) either
TUNE ^ or TUNE to tune in the
desired station.
Press /N. to increase and N/ to decrease
the frequency.
The unit starts scanning and tunes in a station
automatically (Seek tuning).
Press the button again to deactivate the
function. Repeat the procedure until the
desired station is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE /S. or TUNE V', the frequency
decreases or increases step by step.
Press VOL to project out the control
and turn it to + or — to adjust the
volume.
5 em /Sff