Aiwa CT-ZI09 - Manual (Page 6)

RADIO OPERATION
TUNET/A
To turn the unit off
Press PWR.
Switching modes
When the unit is in Radio mode, inserting a
cassette switches the unit to Tape Play mode
automatically.
LO (iocal/DX) button
You can use Local mode when you wish to tune
in only strong stations during seek tuning. In
Radio mode, press LO to select Local mode. The
“LO” indicator lights up.
• Press LO to cancel Local mode and switch to
DX (distance) mode.
♦The “ST” (stereo) indicator lights up when the
tuned-in station is broadcasting in stereo and
the reception is good.
PRESETTING STATIONS
To preset stations automatically
(auto memory)
1
Press BAND to select a desired band
from among FM1, FM2, FM3 and AM.
FM1 1 f~tl n i
1 u u.
<
2 Press and hold A.ME for more than 2
seconds to activate the automatic
preseting function.
The six strongest available stations wiil be
stored in memory on the preset station buttons
1 to 6 in order of their signal strength.
Use this function to automatically preset up to 6
stations each for FM1, FM2, FM3 and AM (up to
a total of 24 stations).
•When auto memory is completed, the station
stored in the preset station button 1 is tuned in.
•To stop auto memory, press A.ME again.
To check the preset stations (preset scan)
• If you wish to check the preset stations, press
A.ME for less than 2 seconds. The preset stations
stored in memory will be tuned in for 5 seconds
each in order.
• To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
5
ENGLISH