Recording, 2 get ready to record from the source, Note (csd-ed67 only) – Aiwa CSD-ED 57 User Manual

Page 7: 3 press # rec to start recording, To record only the selected tracks of a cd, To record on the tape again

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

irrrrrfrnrnirfriBMMHBaa

RECORDING

Note that recording is done on only one side of the tape.

1 Insert a tape with the side to be recorded facing

out.

2

Get ready to record from the source.

To record from a CD, press CD and load the disc.
To record from a radio broadcast, press RADIO/

BAND and tune to a station.

NOTE (CSD-ED67 only)

Make sure that <3 of the OPE/BATT/DIR indicator is on.

If it is not on, press DIR to turn it on.

3

Press # REC to start recording.

◄ ► PLAY or ◄ PLAY is pressed simultaneously.

When the selected function is CD, CD play and

recording starts simultaneously.
For CSD-ED67, REVERSE MODE is also pressed

simultaneously. At the end of the tape, it reverses to the
back side although recording stops (the deck enters play

mode).

Press W ± STOP/EJECT to stop the tape and press ■

STOP/MEMORY to stop CD play.

To record only the selected tracks of a CD

1 Follow steps 1 to 3 of PROGRAMMED PLAY on page 5

to program tracks.

2 Press • REC.

To stop recording, press M / ± STOP/EJECT.
When recording from a CD, play pauses. To stop CD play,

press ■ STOP/MEMORY.

To pause recording, press II PAUSE. To resume

recording, press again.

To erase recording, press • REC while the power is off.
After recording, press POWER 6 STANDBY to turn the
power off.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Side A

Tab for side A

ENGLISH

Advertising
This manual is related to the following products: