Audiovox CE-300 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIG. A FIBERGLASS CAP ROOF
(CROSS SECTION OF ROOF)
^ FIBERGLASS ROOF CAP
r STEEL ROOF
A[R GAP
AIR GAP
¿-MOLDED HEADLINER
FIG. A DISASSEMBLY;
1, Rem ove m olded inside headliner prior
to installation
2.
Do not rem ove the f berglass roof cap
See Rg. 1 for iMtallatlon
FIG. B STEEL ROOF WITH HEADLINER
(CROSS SECTION OF ROOF)
STEEL ROOF
RG, B DISASSEMBLY:
i. Rem ove m olded inside headliner prior
to installation
Note:
If the air gap (space) between the
steel roof and the headliner is less
than 1/4', refer to Rg. C
See Fig. 2 for Installation
RG. C STEEL ROOF ONLY
(CROSS SECTION OF ROOF)
STEEL ROOF
NOTE:
SOM E OF THESE TYPES
OF ROOFS HAVE A HEADLINER
THAT IS GLUED TO INSIDE
OF THESE OF THE ROOF (NO
GAP IS IN RG. C)
RG. B DISASSEMBLY:
1. If the roof has an inside headliner that
is either flush or has an air gap of less
than 1/4", do not rem ove the headliner
See Rg. 3 for Installation