Cab wiring, Housing wiring – Audiovox CE-300 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cab W iring
1. Route pre-instaLLol antenna Lead to mounting plate for connediou to radio later in inatalLation,
2. Locate iJie two wire (Red and Black) harness and the single Green/Whitc stripe iiamess in this til,
3. Connect the Black wire to vehicle ground using the erimp-on ring terminal and screw included.
4. Splice the Red wire lo any +12 volt accessory wire in the cab using the quick splice included.
5. Splice the Green /White stripe wire to any +12 volt battery source in the cab using the quick splice connector included.
6. Route all three wires to the radio mounting plate for latex connection.
Housing Wiring;
1. Conneci 2-pin Red/Black plug to tnaling 2-pin plug.
1.
Conneci Green/ White wire to mating Green/White wire.