Beko RBI 2301 - Manual (Page 7)

Elettrieal reififfremenis
Before mser^/ngi the plug info the woH socket
maAe sure that the voitage and the frequency
shown in the rating plate inside the appliance
corresponds to your electricity supply
Ensure that the plug remains readily accessible.
Do not use muifipie adapter bar or extension
cable.
Warning! This appliance must be
earthed.
Repairs to electrical equipment should only be
performed by a qualified technician. Incorrect
repairs carried out by on unqualified person
carry risks that may hove critical consequences
for the user of the appliance.
- Route electrical supply cord to oliow easy
connech'on and disconnection after installation.
~ A contact separator should be used if the
supply cord is not accesible.
• Do not dispose of the opplionce on a fire.
AfBSKO, f/ie core ana protection of our
environment is an ongoing commitment. This
appliance which is among the latest range
introduced is particularly environment friendly.
Your appliance contains non CFC/HFC natural
substances in the coo//ngf system fca//ed R600aj
and the insulation foo//ed cyciopentonej which
are potentially flammable if exposed to fire.
Therefore, take care not to damage, the coo//ng
circuit/ pipes of the appliance in transportotion
and in use. In case of o damage do not expose
the appliance to fire, potential ignition source
and immediately ventilate the room where the
appliance is situated.
• We suggest you contact your locoi authority
for disposal information ana facitiities available.
WARNING- Keep ventilation openings, in the
app//once enclosure or in the built in structure,
clear of obstruction.
WARNING- Do not use mechanical deWces
or other means to accelerate the defrosting
process, other than those recommended by the
manufacturer.
WARNING- Do not damage the refrigerant
circuit.
WARNING- Do not use electrical appliances
inside the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
Tmnsportation
instru€tions
1* The appliance should be transported only
in upright position. The packing os supp//ed
must be mtacf^durmg transportation.
2, If during the course of transport the appliance,
has been positioned horizontoHy, it must not
be operated for at least 4 hours, to allow the
system to settle.
3, Failure to comply with the above instructions
could result in damage to the appliance, for
which the manufacturer wiH not be iioble for.
4, The appliance must be protected against
rain, moisture and other atmospheric innuences.
Important!
* Core must be taken while c/eanmg/corrymg
the opplionce not to touch the bottom of the
condenser metal wires at the back of the
appliance, os this could cause in/ury to fingers
and /lands.
• Do not attempt to sit or stand on top of your
appliance os it is not designed for such use.
Vbu could injure yourself or damage the
appliance.
• Moke sure that the mains coble is notcought
under the appliance during and after moving,
as this could domoge the cable.
* Do not allow children to play vvith the
appliance or tamper with the controls.
installation InstnnHons
!• Do not keep your appliance in a room where
the temperature is likely to fall below 10 C
(50 ^ F) ot night and/or especially in winter,
as it is designed to operate in ambient
temperatures between + ? 0 and '*^32 ^ C (50
ana 90‘^F). At lower temperatures the appliance
may not operate/ resulting in a reduction in the
storage life of the food.
2,
Do not place the appliance near cookers
or radiators or in direct sunlight, as this will
cause extra strain on the appliance*s functions.