Temperature rentrel and adiusimeni, Before oporuting – Beko RBI 2301 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Temperature rentrel

and adiusimeni

Operafìng temperatures are controlìed by the
fhermoBtaf кг}оЬ (fig* 2). Settings may be

mode from Ì to 5, the coldest position.

When the appliance is switched on for the first

time, the thermostat should be adjusted so that

after 24 hours, the average fridge temperature

no higher than ¡41 T ).

We recommend setting the thermostat half way

between the 1 and 5 setting and monitoring to
obtain the desired temperature i. e. towards 5
you wii! obtain о lower temperature and vice

versa. Some sections of the fridge may be

cooier or warmer ( such os the salad crisper
and the top part of the cabinet ) which is quite
normal.

In ambient temperatures above 25°C

especioiiy in summer, turn the hermostat knob

towards 5. In ambient temperatures below
25^C (77^Fj turn the thermostat knob to a half

way position.
Frequent door opening causes internal

temperatures to rise, so it is odvisabie to

close the door os зооп as possible after use.

Before oporuting

Final Check
Before you start using the appliance check that:

1* The interior is dry and air can circulate freely

ol the rear.
2* The inferior is clean as recommended under

'^Cleaning and care/'

3. The plug has been inserted into the wail
socket and the electricity is switched on. When

the door is open the interior light will come on.

And note that:

4. You will hear a noise as the compressar
starts up. The liquid and gases sealed within

the refrigeration system may also make some
(noise), whether the compressor is running or

not. This is quite normal.
5. Slight undulation of the top of the cabinet

iS quite normal due to the manufacturing process
used; is not a defect.

6. We recommend setting the thermostat knob
midway and monitor the temperature to ensure

the appliance maintains desired storage
temperatures (See section Temperature Control

and Adjustment).
7m Do not load the appliance immediately is

switched on. Walt until the correct storage

temperature has been reached. We recommend

checking the temperature with an accurate

^^ermometer (see; Temperature Control and

Adjustment).

Advertising