Basic operation, Turning the unit on, To store a number in memory – Audiovox CMT-1000 User Manual
Page 4: To recall a number from memory, To lock the unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(6)
n,QQfe| button and indicator activates the
electronic lock when pressed for about 1 second.
button and indicator activates the
external horn alen circuit when pressed for about
1 second.
button and indicator activates the
(optional) electronic message mode.
(9)
switch controls power to the unit.
(10) HEADSET JACK for optional “hands-free”
headset.
(
11
)
M 2 indicator lights when a call is in progress.
(
12
)
|N€>^^ (no service) indicator lights when the
unit is in a non-coverage area.
(
13
)
[BOAMJ indicator lights when the unit is out of the
home area.
(14)
*^( received) indicator lights if the unit
received a call in your absence.
(15) 10-DIGIT LCD DISPLAY indicates telephone
number.
(16) DIGIT KEYS to enter telephone number or
unlock code.
(17) ¡^EC/|tJ.l key recalls telephone numbers on the
repertory dialing list from memory
(18) ItdN^ key suppresses key pad tones when using
the scratch pad feature in the hands-free mode.
(19) kaJEltBi key clears all digits from the memory
and the display.
(20) HANDSET RELEASE LEVER frees handset from
the locked position.
(21)
FI
n
^ key terminates the call (hangs up).
(22)
[3T(y^ key stores numbers on the repertory
dialing list in memory.
(23) [SgM key for originating or receiving a call.
*indicates optional feature.
BASIC OPERATION
Turning the Unit On
With the ignition switch at "on” or “accessory,” turn on
the power
switch. The indicator will light (all
indicators will light momentarily, and a tone will be
heard).
To Store a Number in Memory
1. Press ICtEARj, then enter telephone number.
2. Press iSTOftEl, then enter the memory address (01
through 30).
To Recall a Number from Memory
Press
I. then enter the memory address (01
through 30).
If You Want to See the Prefix
(Number Longer than 10 Digits)
After pressing
, hold down the second digit of
the memory address.
To Lock the Unit
Press and hold down the
button until the
indicator lights. The unit will remain locked until
unlocked, even if the ignition switch is turned off.
To Unlock the Unit
Enter the three digit unlock code. The indicator will go
out when the unit is unlocked.