Hyundai H-CMD7084 - Manual (Page 21)

21
Setting the time
Displaying time: Press DSP button on the RC or DISP button on the panel to display the current time on the
LCD, it returns to original after 3 seconds.
Setting time: Press and hold DSP button on the RC or DISP button on the panel until the two points in the
middle of the clock stop blinking, you can rotate VOL button on the panel or press VOL buttons on the RC to
adjust hours. Press DSP/ DISP, the minutes blink, rotate VOL button on the panel or press VOL buttons on
the RC to adjust minutes. Press DSP/ DISP again to confirm.
Note: After receiving a station, if the current time is not the same as the RDS (Radio Data System), the time of
RDS will adjust to the current.
Mode setting
Press the SOURCE button on the RC or MODE button on the panel to select Radio mode, Playback mode or USB
mode.
If you select Radio mode, press BAND once or more to select FM1, FM2, FM3, FM (OIRT), AM1, AM2.