Hyundai H-CMD7084 - Manual (Page 34)

34
System setup
1. Press SETUP button on the RC to enter the setup menu. In Setup mode, press SETUP key again to quit the
setup page.
2. Use the buttons to choose the setup page: General page, Dolby setup, Preference page, Exit.
3. Press the button to enter the setup page selected.
4. Use the and buttons to select the option you want to adjust.
5. Press to enter the adjustment list. Use the and buttons to select the adjustment and press ENTER or
to confirm and return to options list.
6. To return to setup page list press the button in the options list.
Note: The setup is memorized and kept after power off.
General page
TV DISPLAY
Normal/PS: When the unit connects to the normal TV set, the
wide-screen image shows on the full screen, but some part is
cut off (4:3).
Normal/LB: When the unit connects to the normal TV set,
the wide-screen image shows and black bars appear on the top
and bottom of screen (4:3).
Wide: Use this item when the unit is connected with the wide
screen (16:9) TV set.
ANGLE MARK
It will show the angle mark when playing DVD disc with multi-angle view if selecting On.
OSD LANGUAGE
Select on-screen display language.