Denso MOVINCOOL CLASSIC PLUS 26 - Manual (Page 37)

TROUBLESHOOTING AND REPAIR
29
Removal of Right Stay Screws
Removal of Control Panel Assembly
Removal of Left Stay Screws
G. Remove (2) screws from Control Panel
Assembly Right Stay.
H. Remove (2) screws from Control Panel
Assembly Left Stay.
I. Disconnect the following connectors from the
control board:
(1) Wire Harness, Relay Board to Control
Board J201 (10-pin)
(2) Drain Tank Switch J103 (2-pin)
(3) Room Temperature Thermistor J101
(2-pin)
(4) Freeze Thermistor J102 (2-pin)
(5) High Pressure Switch J104 (2-Pin)
NOTE: Mark each of the 2-pin connectors with a
different color marker to ensure the correct orienta-
tion when they are re-connected.