Section 4 – operating instructions, 1 administrator and doorman commands & functions, 1 lobby panel on / off – DoorKing 1820 User Manual

Page 47: 2 calling the lobby panel, 3 accessing the outside phone line, 4 calling preprogrammed telephone numbers

Advertising
background image

SECTION 4 – OPERATING INSTRUCTIONS

4.1 Administrator and Doorman Commands & Functions

These commands are used by the System Administrator, Doorman, Concierge or Security Desk to
access various features of the 1820 system.

4.1.1 Lobby Panel On / Off

This programming sequence is used by the doorman or system administrator to turn the lobby panel
On or Off.

Factory Default = 1 (On)

1. Take the doorman telephone off hook.

2. Press *12 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter 0 to turn the lobby panel Off, or enter 1 to turn the lobby panel On, then press *

(beep).

4. Hang up the doorman telephone to end the programming session.

4.1.2 Calling the Lobby Panel

This programming sequence is used by the doorman or system administrator to place a call to the
lobby panel from the doorman telephone.

1. Take the doorman telephone off hook.

2. Enter the four-digit lobby panel directory code programmed in section 3.2.3.

3. The lobby panel will answer.

a. If a DoorKing 1830 series or “P” series lobby panel is used, the lobby panel will

answer with a 1 second tone. Once the tone is heard, press *16 and then enter
the four-digit lobby panel MASTER CODE _ _ _ _. This will open communication
between the lobby panel and doorman phone.

4. Hang up the doorman telephone to disconnect from the lobby panel.

4.1.3 Accessing the Outside Phone Line

A dedicated C.O. phone line must be connected to the 1820 control panel for this feature to be
operable.

1. Take the doorman telephone off hook.

2. Enter the four-digit outside line access code that was programmed in section 3.3.1. The

outside line dial tone will be heard allowing calls to me made.

4.1.4 Calling Preprogrammed Telephone Numbers

A dedicated C.O. phone line must be connected to the 1820 control panel for this feature to be
operable. Preprogrammed telephone numbers can be called from either the Doorman phone or the
lobby panel.

1. From either the lobby panel or doorman phone, enter the four digit access code of the

preprogrammed phone number you want to call. Refer to section 3.3.2.

1820-065-B-2-06

Page

47

Advertising