3DLABS Oxygen 402 - Manual (Page 15)

Installation and User’s Guide
9
8. The Setup program will take you through the actions required to
install your Oxygen software. If you have exited all other Windows
applications, then click the “Next” button in the Welcome window
(Figure 4). Otherwise, click the “Cancel” button to exit the Oxygen
3D Family Setup program; close all other Windows applications
and resume your Oxygen software installation by repeating steps 1
through 8.
9. The Electronic License Agreement should be displayed. Please
take a moment to review the Oxygen software use, distribution,
and restriction guidelines. You may examine the printed copy of
the license agreement found in
Appendix G: Software License
Agreement on page 68 of this manual. In addition, you are bound
by license agreements associated with any third-party software
products included for distribution on the Oxygen CD-ROM. To
accept the terms of the license agreement, click the “Yes” button.
NOTE : If you are unwilling to agree to the terms set forth in the
license agreement, then click the “No” button to exit the Setup
program. Return the card, CD-ROM and all package contents
along with your receipt to the place of purchase for a full refund.
Figure 4: Oxygen 3D Family Setup